Overview
Qubino Smart Meter ZMNHTD1 provides direct energy measurement in a single-phase electrical network up to 65 A. Installed on a DIN rail, it measures consumption and production without external current clamps and sends metering data to a compatible Z-Wave gateway.
Key features
- Direct two-wire measurement of a single-phase circuit up to 65 A, without current clamps
- Measures voltage, current, active power, reactive power, power factor, imported and exported active energy, apparent energy and reactive energy
- Suitable for whole-installation, individual-circuit and solar import/export monitoring
- Z-Wave Security 2 support, auto-inclusion and repeater operation
- Configurable power-change and timed metering reports
- Optional control of two loads up to 32 A each with separately available BICOM and IKA accessories
- Compact 35 mm DIN-rail format
Applications
- Monitor the energy consumption of a home or single electrical circuit
- Track energy imported from and exported to the electrical network
- Measure energy generated by a solar installation
- Switch or protect selected loads using optional external contactors and configured power thresholds
Compatibility and integration
The meter operates in a Z-Wave network at 868.4 MHz and supports Security 2. A compatible Z-Wave gateway is required for remote monitoring and configuration. Availability and presentation of individual metering values and advanced parameters depend on the gateway’s command-class support.
Installation requirements
- Install indoors on a 35 mm DIN rail.
- Installation must be performed by a licensed and qualified electrician in accordance with the Qubino wiring instructions.
- The electrical installation must be protected by an over-current protection fuse rated up to 63 A, as specified in the installation manual.
- For S2 inclusion, retain the supplied DSK label or record its key before the mounted device label becomes difficult to access.
Technical specifications
| Specification | Value |
|---|---|
| Manufacturer / brand | Qubino |
| Model / ordering code | ZMNHTD1 |
| EAN / GTIN-13 | 3830062070362 |
| Metering system | Single phase (1b), direct two-wire measurement |
| Nominal voltage | 230 V AC (±20%) |
| Reference current (Iref) | 5 A |
| Maximum current (Imax) | 65 A |
| Minimum current (Imin) | 0.25 A |
| Starting current | 20 mA |
| Power consumption | < 2 W at nominal voltage |
| Measured values | V, A, W, var, PF, kWh import, kWh export, kVAh, kvarh |
| Active energy / power accuracy | Class 1 (EN 62053-21); class B (EN 50470-3) |
| Reactive energy accuracy | Class 2 (EN 62053-23) |
| Wireless protocol | Z-Wave Plus, 868.4 MHz |
| Z-Wave security | Security 2 (S2) supported |
| Repeater | Yes |
| Indoor wireless range | Up to 30 m, depending on building materials |
| Optional switching | Two loads up to 32 A each with separately available BICOM432-40-WM1 and IKA232-20/230 V |
| External-control interfaces | Optical IR for BICOM; terminal output for IKA |
| Protection rating | IP20 |
| Protection class | Class II |
| Installation category | 300 V RMS, category III |
| Pollution degree | 2 |
| AC voltage test | 4 kV |
| Operating temperature | -15 to 55 °C |
| Storage temperature | -40 to 70 °C |
| Main-terminal conductor capacity | 1.5 to 16 mm²; up to 25 mm² depending on conductor construction |
| Main-terminal torque | Maximum 3.5 Nm, PZ2 |
| Mounting | 35 mm DIN rail |
| Dimensions (W Ă— H Ă— D) | 36 Ă— 90 Ă— 64 mm |
| Net / packaged weight | 150 g / 170 g |
| Enclosure | Self-extinguishing material compliant with UL94 V |
| Colour | RAL 7035 |
Package contents
- Qubino Smart Meter
- Installation manual
- Z-Wave DSK label
Documentation
| Document | Description | Link |
|---|---|---|
| Product manual | Installation, operation and technical reference for this product/model. | Download manual (PDF) |
Reviews
There are no reviews yet.