Description
Product information “FIBARO CO Sensor”
The CO Sensor from FIBARO is a compact carbon monoxide detector. With its stylish design, the CO Sensor can be mounted at the ideal height on the wall. Due to its high sensitivity, the sensor detects carbon monoxide (CO) gas at minimum levels. An alarm is signalled by the built-in siren, flashing LED and by sending Z-Wave commands.
Features
- Can be used as stand-alone carbon monoxide detector without intelligent features
- Wall-mounted
- Battery powered
- Fully wireless
- Acoustic signal and LED indicator
- Built-in temperature sensor.
Properties “FIBARO CO Sensor”
| Acoustic signal: | 85 dBA at 3 meters |
|---|---|
| Alarm Response time with standard settings: | 50ppm 60-90min 100ppm 10-40min 300ppm |
| Battery included: | Yes |
| Battery life: | 3 years with standard settings (tested with Panasonic Industrial Lithium) |
| Battery type: | CR123A |
| Dimensions Product: | 65 x 28 mm |
| In accordance with guidelines: | RED 2014/53/EU RoHS 2011/65/EU EN 50291-1:2010 |
| Lifetime under typical circumstances: | 8 years |
| Measurable carbon monoxide range: | 0 – 450 ppm |
| Measurement accuracy: | ± 10ppm / ± 5% |
| Operating humidity: | 10-95% relative humidity without condensation |
| Operating temperature: | 0-50 °C |
| Power source: | 3V battery |
| Protocol: | Z-Wave, Z-Wave (500 series chip) |
| Radio frequency: | 868.0–868.6MHz 869.7–870.0MHz |
| Range: | outdoor up to 50m indoors up to 40m (Depending on terrain and building construction) |
| Sensors: | Carbon monoxide (CO) |
| Transmit power: | -5 dbm |
Data according to manufacturer. Errors and changes reserved.
Product number:Â FGCD-001 ZW5
Manufacturer:Â FIBARO
EAN:Â 5902020528838
Reviews
There are no reviews yet.